Soda flakes are currently widely used and can play a good role in cleaning oils and fats. We usually use caustic soda as a cleaning agent for range hoods. This method is easy to use, simple and flexible, and can be operated at home by oneself. The effect is relatively good, and the cleaning process is time-saving and labor-saving.
The range hood requires 100 grams of tablet alkali. Use a plastic pot that can fix the bottom wheel, pour more hot water into the half pot, and then put this product into the medicine. Then remove the wind turbine and soak it in the solution for five to six minutes, then flip it over and continue soaking. After soaking, almost all the fat will fall off, and then rinse with water to clean it.
After cleaning the wind turbine, you can use an alkaline water to clean the blower box: wear rubber gloves and scrub the blower box with a steel wire ball. After wiping, wipe with a dry cloth. The filter should also be soaked in medication for a period of time and then cleaned with a toothbrush. Afterwards, throw the shredded cloth and steel balls into the solution prepared with the product, soak them in clean water, and make them look like new drugs.
Soda flakes can replace other chemical cleaning agents, not only with higher safety, but also with better effectiveness. Therefore, in the future, you can consider using it to clean the engine hood, but you need to pay attention to the reasonable usage ratio to achieve a good cleaning effect.
The above is all about caustic soda in this issue. After mastering the techniques for cleaning oil stains mentioned above, you can try it yourself. If you have any questions, you can contact us directly.
