As a commonly used raw material in many enterprises, caustic soda is widely used. However, when preparing caustic soda solution, for the convenience of people, its anti-corrosion properties affect the safety of user preparation, and correct operation is crucial. Therefore, the following will introduce how to correctly prepare the solution.
The properties of flake alkali produced by flake alkali manufacturers are basically white semi transparent flake solid. During the production process, the product may be contaminated or the alkali solution may react slightly with the equipment, resulting in some red, blue-green, or gray mixed colors. Therefore, when making a purchase, you must choose products that are pure white, thin in thickness, and have a small area. This type of caustic soda is easier to dissolve during use.
After the dissolution of caustic soda, it should be mixed and discharged. Leaving it in water for too long or pouring it into water at once can cause clumping and slow dissolution. When dissolving, there is no need to cool down. After dissolving once and then cooling down again, a higher concentration of alkaline solution can be obtained. In addition, the higher the temperature, the higher its solubility and the higher the concentration of the obtained alkaline solution. However, it should be noted not to add too much caustic soda, as once the solubility of the solution is saturated, the caustic soda will not dissolve and will hinder and affect the effect.
The preparation of caustic soda solution requires us to strictly pay attention to its operation method and some details to avoid a series of unnecessary troubles such as corrosion, equipment and personnel injury, which may affect the safety of use and equipment damage.
片碱溶液的配制要求我们严格注意其操作方法和一些细节，以免发生腐蚀、设备和人员伤害等一系列不必要的麻烦，从而影响使用安*和设备损坏。
