Generally,beer bottles used by beer manufacturers need to be recycled.After recycling and testing by the manufacturer,clean and disinfect according to relevant standards before reusing.We may use caustic soda here because its alkalinity is strong,so it can be said that it has strong cleaning power,but it also needs to be controlled.Let's take a detailed look at how to clean beer bottles with this product.
Soda flakes have a very good cleaning effect when cleaning beer bottles.Traditional bottle washing usually uses it or liquid alkali,but sometimes bottle washing additives are also used.Generally speaking,before cleaning beer bottles,they should be cleaned separately according to their degree of dirtiness.When cleaning relatively clean bottles,adding 0.5%caustic soda to the tank is sufficient,and the degree of dirtiness generally needs to be increased to about 1.5-2.5%.
But if it is a dirty bottle,it may increase to over 3.0%.It is worth noting that the addition amount must be strictly controlled and cannot be too high or too low.It is worth noting that if there is an unexpected shutdown during the bottle washing process,it is necessary to ask how long the shutdown will take.If the time is too long,be sure to push out the bottles soaked in the alkali tank,otherwise these bottles will be washed out due to the alkali paste hanging on them.
When using caustic soda to clean beer bottles,it is important to control the concentration of the added beer bottles and avoid soaking for too long.Otherwise,if the bottles are not cleaned thoroughly,alkali frost may remain on them.
